What I Can Teach You About

Standard Colors for Your Underground Utilities

It is now easier to know what an underground utility line is for. The risk was high before when people could not easily identify the type of utility lines underneath whenever they dig. Although not completely eliminated, risks today have been reduced. If there is a need to dig the ground, it is very important that the utility lines first be identified. If you need to dig through a piece of land today, you are required by the OSHA to first identify or locate underground utilities. Otherwise it can be something disastrous. The worst thing that can happen if lines are not identified is that fatal injuries can happen. It can also interrupt services in your area where the line is located. Before digging their property, people should call 811 to call the utility companies so that these incidents are prevented. Calling the 811 number will enable utility companies to come out and mark their respective utility lines.

Sometimes, even if the lines are marked accidents still happen. The reality is that there is an incident almost every 6 minutes where utility line are struck. When this happens, it affects traffic lights, wastewater pipes, telecommunication lines and more. This is then something that affects public health and safety.

Companies can locate utility lines through the use of GPR or Ground Penetrating Radar. This has made it easier to locate utility lies underground and other important things. Calling 811 is enough for the property owner to let companies located their lines.

There are certain colors that mark different utility lines for easy identification. The colors below indicate the kind of utility uses it.

White lines are for proposed excavation sites. You can mark areas with white lines that will soon be excavated.

If you see pink lines, they are temporary survey markings. These are used by surveyors to mark off legal property boundaries.

If you see red lines, then you can be sure that these are electric power lines, cable, conduit, and lighting cables. This color is appropriate for electrical works since it is associated with fire and danger.

Lines for gas, oil, steam, petroleum, and gaseous materials use the color yellow. Bright yellow is an appropriate warning color since it is very disastrous to have a natural gas leak.

Orange lines are used for communication, alarm, signal lines, cable or conduit. Lines for potable water use blue lines. If you see purple lines, that this is for reclaimed water, irrigation and slurry lines. If you see the color green, then it indicates sewer and drain lines. You can derail any project for a long time if you hit these lines.

Click here now if you want to learn more about the color coding of utility lines. Click here for more.